Push-to-automatic learning feature and automatically adapt to
different motor and load.
Vehicle detector selectable, so the function of "arm down when
car passed”, “anti damage to cars” and "release for car team" can
Control handles with "manual / automatic" options.
Wireless remote control can be used for long-distance and
Anti-stress device such as Infrared or radio waves can be used in
this equipment, to reduce the incident of car damage.
Optional RS485 or RS232 serial communications interface, simple
and reliable communication protocols for easy control on the remote
control with state feedback.
Provide various modes of operation and operating parameters
through the code switch settings, be able to satisfy users of
High-speed Barrier unique features:
Obstacle automatic detection: during lowing, arm will rise up
again when detected the obstacle; while during rising, the arm will
stop and unlock when detected obstacle to prevent any incident. The
obstacle detection sensitivity has four degrees which is set
through code switch.
automatically unlock when no power: when gates power on and work
properly, if arm is horizontal or vertical, gates will lock arm to
ensure no damage or incident; when gate power off, the arm will be
automatically unlock for the movements by hands. Arm has an
anti-collision mechanism which can maximally reduce the damage from
vehicle collision to the gates.
system integration, powerful;
anti-jamming software and hardware watchdog ensure that no Death
of single chip;
use photoelectric sensors for place detection, non-contact work,
and never migration;
heavy and weak current completely separated, motor control using
photocoupling, zero-turn-on technology, so that the control board
work with high reliability and no interference;
input and output signals of electrical isolation to ensure system
advanced motor with thermal protection, when temperature is
higher than 145 degrees, the power is automatically cut off, motor
will not be burnt easily;
Motor high reliability, long life, running a small vibration, low
noise, stable speed, an instant start, back and stop;
use rising and lowing overtime protection, to ensure that no arms
Use precise sine bar linkage to make sure the gate for ease open,
slow stop and no stopping impact movement.
chassis use steel plate with special arts, surface with
high-level automotive paint or powder coating which is corrosion
and beautiful, also can avoid fading caused by ultraviolet
chassis using waterproof, moisture-proof, dust-proof design;
arm adapt special aluminum material can be posted the two-color
reflective film outside to make it clearly visible at night;
For use in different occasions (e.g. in a highly limited space
underground car parks), we can manufacture arms according
Arm can be installed on any chassis left or right side of the
(default is on right side).
Please follow the conditions:
Temperature: TAB series of high-speed -30 ℃ ~ +70 ℃
Relative Humidity: 20% to 95%
Reliable speed reducing equipment should be installed in car
coming direction to make cars slow down in case of accident.
When connected with vehicle detectors, infrared, pressure wave
and other auxiliary devices, these devices should ensure the
reliability and stability.
Constraints are in the purchase contract.